11
2023
-
09
Characteristics of Wireless Electronic Remote Control
Author:
1. The wireless electronic remote control has the function of setting data not to be lost: pulse sending, sending method, single/double code conversion are all set by the keyboard, and the setting status will remain valid until the next setting. Replacing the battery and long-term power outage have no impact on the setting data.
2. Dual status indicator lights on the panel: There are two indicator lights on the panel, indicating the effective button status, emission status, etc. Double digit code operation, very intuitive to use.
3. By increasing the transmission power of the wireless electronic remote control, remote control can be achieved. The wireless electronic remote control adopts a high-power transmission design, with a longer transmission antenna, and the remote control distance is designed to be 200-1000 meters (open type).
4. The wireless electronic remote control uses a high capacity battery, which increases the battery capacity. The wireless electronic remote control uses a 6F22 9V stacked battery for power supply, which increases the battery capacity several times compared to the A23 battery commonly used in remote controls. This not only reduces the usage cost, but also lays the foundation for high-power transmission. The remote control has a charging input socket that can charge the 6F22 rechargeable battery, which is beneficial for environmental protection and long-term use.
5. Static complete power outage: When the button is pressed, the battery is powered on, and after the operation is completed, the battery completely stops supplying power. Save electricity and extend battery life.
6. The wireless electronic remote control has a retransmission function: the last double code operation of the remote control has a retransmission function. In the dual code sending state, press the "*" key, and the last dual code will be sent using the instant sending method. In the dual code sending state, press the "#" key to wait for release, and the last dual code will be sent using a timed method.
7. The buttons of a wireless electronic remote control are divided into single button transmission and double button transmission: The number of buttons on the remote control is limited, and even a large keyboard cannot hold hundreds of buttons. The wireless electronic remote control adopts a telephone multi bit code group mode, which can be operated with a single button like a regular remote control, or can be set as a double bit code transmission method. In the dual digit code working method, just like using a phone, pressing two buttons immediately sends a dual digit code command. The remote control can also be set to a 3-digit code and a 4-digit code. Even with a two digit code, the number of instructions is 12+100=112, which is sufficient for general use. Single button and double button codes can be manually converted.
8. The number of encoded addresses for wireless electronic remote controls has increased: the number of encoded addresses for PT2262 is 6561, and this remote control has 65365 encoded addresses, which is 10 times the number of encoded addresses for PT2262, greatly reducing the repetition rate.
9. There are two transmission methods for wireless electronic remote controls: timed transmission and ordinary transmission. Ordinary transmission is currently the remote control transmission method used on the market; Dingfa is a new transmission method that not only ensures that the receiver can receive remote control commands normally, but also greatly shortens the transmission time. This transmission method not only reduces the interference caused by simultaneous transmission between remote controls, but also saves the electricity required for transmission, which is beneficial for extending the battery life. You can manually switch settings between the two transmission methods.
10. The wireless electronic remote control can be compatible with the original 2262
Related news
Our company participated in the exhibition
2023-08-22
What is a wireless electronic remote control
2023-09-11
MESSAGE
You are welcome to, we will serve you faithfully!
Follow us
Add：Qinlan town industrial park, Tianchang
Tel： 13955048322(Manager Chen)
